You can’t access and mend the hp compaq 394224-001 ac adapter power jack while the motherboard is mounted to the metal bracket, it is having to be got rid of introductory. In a dell laptop the power jack is soldered and attached to the main board or a motherboard. Whether or not the laptop loses power intermittently when you wiggle the power plug, probably the dell ac adapter power jack is damaged and has to be repaired. In order to mend the hp compaq 394224-001 ac adapter power jack you’ll have to eliminate the motherboard.
Remove two screws securing the cooling fan. Disconnect fan cable from the motherboard. Remove the fan. Remove one screw securing the power button board. Lift up the board and disconnect it from the motherboard. Loosen three (red) screws and also not to forget to remove one (green) screw securing the heat sink. Remove the heat sink.
Remove four screws securing the hard drivebracket. Lift up the bracket and disconnect it from the motherboard. Remove two screws saving the hp compaq 394224-001 ac adapter speaker assemblage. Disconnect the speaker cable from the motherboard. Unplug the cmos (rtc) battery. Remove two screws securing the pc card slot. Lift up the slot and disconnect it from the motherboard.
Remove one screw securing the modem card. Unplug the modem cable from the motherboard. Remove modem with the cable and phone jack. Remove six hex studs from the laptop ports. Remove one screw securing the motherboard. This screw is situated on the left side from the hp compaq 394224-001 ac adapter power jack.
Start separating the motherboard from the metal bracket. The motherboard has being removed. Now you may access the dell ac adapterpower jack and mend it. Whether or not the power jack is broken, you’ll have to substitute it with a new one. Whether or not the hp compaq 394224-001 ac adapter power jack is loose, you’ll have to resolder it to the motherboard.
Popularity: 1% [?]
Write a Comment
Let me know what you think?